07.2 Carburetor

07.2 Carburetor (Stromberg) - M115

07.2-090 - Layout and operation of Stromberg carburetor standard version
07.2-096 - C. (USA) model year 1974-1976
07.2-100 - Adjusting idle speed
07.2-102 - Checking idle speed shutoff valve
07.2-104 - Removal and installation of idle speed shutoff valve
07.2-105 - Checking, correcting basic adjustment of throttle valve
07.2-107 - Checking, correcting basic adjustment of fuel adjusting screw (national version only)
07.2-110 - Checking, regulating engine
07.2-125 - Checking, adjusting choke
07.2-128 - Performing cold start
07.2-136 - Replacing diaphragm for choke
07.2-137 - Replacing drive lever in choke
07.2-140 - Removing, checking and installing choke
07.2-142 - Checking, correcting choke housing mark
07.2-149 - Subsequent installation of standard choke housing

Carburetor (general)

07.2-180 - Checking, adjusting float valve
07.2-182 - Checking float chamber venting system (national version only)
07.2-186 - Checking fuel return valve
07.2-190 - Cleaning, adjusting carburetor
07.2-194 - Removal and installation of carburetor
07.2-195 - Removal and installation of air piston, air piston diaphragm and nozzle needle

Fuel pump