40 Wheels, Chassis Measurements
40-0001
- Test and adjustment values
40-0200
- General information on chassis alignment
40-0230
- Attachment of Mercedes-Benz quick-clamp holders
40-0300
- Checking and adjusting vehicle level at front and rear axles
40-0302
- Checking and adjusting vehicle level in vehicles equipped with level control on front and rear axles (Model 201)
40-0310
- Checking and adjusting control point of level control
40-0321
- Checking and adjusting ball point position
40-0322
- Checking and adjusting camber and caster at front axle
40-0323
- Checking and adjusting toe-in at front axle
40-0325
- Checking toe-out on turns
40-0331
- Checking camber at rear axle
40-0332
- Checking and adjusting toe-in at rear axle
40-0400
- Checking vehicles in or suspected of being involved in an accident
40-0410
- Measuring rear axle carrier (removed)
40-0420
- Measuring rear axle spring link, camber strut, torque strut, thrust arm and track rod
40-0425
- Measuring wheel carrier
40-0451
- Measuring steering knuckle
40-0452
- Measuring lower wishbone
40-0991A
- Survey of tires/disk wheels/recommended tire make/snow chains
40-0992A
- Survey of tires/disk wheels/recommended tire make/snow chains for national versions
40-1010A
- Disk wheel
40-1020A
- Tires
40-1025A
- Checking tires for lateral and radial runout
40-1030A
- Replacing tires
40-1040A
- Balancing wheels
40-1050A
- Disc wheel and tire conversion and chassis modifications
40-1070A
- Snow chains
Programmed repairs
- Chassis alignment
Select complaint...
Uneven tire wear patterns on front axle
Vehicle heads to the right on a flat road surface
Tire/outboard shoulder wear at the front wheels
©Copyright 2003 Steve Nervig
All Rights Reserved