• Hi Guest !

    Welcome to the 500Eboard forum.

    Since its founding in late 2008, 500Eboard has become the leading resource on the Internet for all things related to the Mercedes-Benz 500E and E500. In recent years, we have also expanded to include the 400E and E420 models, which are directly related to the 500E/E500.

    We invite you to browse and take advantage of the information and resources here on the site. If you find helpful information, please register for full membership, and you'll find even more resources available. Feel free to ask questions, and make liberal use of the "Search" function to find answers.

    We hope you will become an active contributor to the community!

    Sincerely,
    500Eboard Management

throttle body

  1. SL500_WPB

    Smooth idle on cold start, then rough + surging (Video)

    Hi all, let me start by saying that this is for a 1994 SL500. I've had better responses and engagement over here versus BenzWorld so hope this is okay. Short Background: I had a coolant issue a while back that was determined to be due to a leaking heater core. After this was discovered by a...
  2. L

    Throttle body woes

    Hope somebody can give a little insight or advice to a problem with the ETA in my 1993 R129 with ASR (m119.172 engine). The car has been parked over the winter and upon starting the car for the first time after 6 months it went into limp mode. Tried restarting the car a few times and limp mode...
    • LaugeR129
    • Thread
    • eta eta wire throttle actuator throttle body
    • Replies: 10
    • Forum: M119 Engine
  3. makemann

    WANTED WTB: ETA - GAS ACTUATOR (000-141-79-25)

    ETA - GAS ACTUATOR (000-141-79-25) problems Looking to buy an ETA for my 1992 500E with ASR. VIN: WDBEA36E3NB728557
  4. French02chris

    Low idle on M119 ( 400E)

    Alright, so I am having this issue for some time now. When I start the car, it starts fine...no problem : However, the idle is just about 500 RPM ( or a little over...but not where it is supposed to be) in D and R : just under 500 Rpm When driving, the car drives well..no issue The cruise...
  5. Christian_K

    Bigger throttle flap?

    I've read now a couple of times that some tuners raise the throttle-flap diameter on our babies from 74mm stock to 80mm. DMS-Tech from Russia for instance do that. Maybe 036 may ask them how and why? http://www.dms-tech.ru/dmstech3.htm How do they do that? I mean machining new butterfly halves...
Back
Top