-
Hi Guest !
Welcome to the 500Eboard forum.
Since its founding in late 2008, 500Eboard has become the leading resource on the Internet for all things related to the Mercedes-Benz 500E and E500. In recent years, we have also expanded to include the 400E and E420 models, which are directly related to the 500E/E500.
We invite you to browse and take advantage of the information and resources here on the site. If you find helpful information, please register for full membership, and you'll find even more resources available. Feel free to ask questions, and make liberal use of the "Search" function to find answers.
We hope you will become an active contributor to the community!
Sincerely,
500Eboard Management
WANTED Wanted - M104 Engine wire harness - 1244402933
- Thread starter LTYLER
- Start date
Lee, there are a few on eBay... click here. Current offerings are starting at around $825 with shipping (plus sales tax). That particular harness was used one year only (1995 USA model year) so it's a bit harder to find.
Hello gents,
Because of my troubles with ignition I had to replace it too, I bought a new harness here in Germany by a specialist which is producing also for Mercedes Benz as far I understood.
Kurth Classics Autoparts
My M104.996 engine harness cost me around 850€.
One important thing about the harnesses are the plugs at the ends.
Here in Germany are some small shops they offering a moderate refurbishing price when you send your own harness, so they can use the wire end plugs to reproduce a new one.
This is also my plan with my old one as a spare part.
If there is a car electrical shop may they can build you one and solder the ends with the plugs you got.
Most important things are first knowledge to remove the plugs from the ends second is the correct diameter length of the wires to make a good an equal resistance value with the ecu communication like the original wires as final to label the plugs for correct positions on the engine.
Because of my troubles with ignition I had to replace it too, I bought a new harness here in Germany by a specialist which is producing also for Mercedes Benz as far I understood.
Kurth Classics Autoparts
My M104.996 engine harness cost me around 850€.
One important thing about the harnesses are the plugs at the ends.
Here in Germany are some small shops they offering a moderate refurbishing price when you send your own harness, so they can use the wire end plugs to reproduce a new one.
This is also my plan with my old one as a spare part.
If there is a car electrical shop may they can build you one and solder the ends with the plugs you got.
Most important things are first knowledge to remove the plugs from the ends second is the correct diameter length of the wires to make a good an equal resistance value with the ecu communication like the original wires as final to label the plugs for correct positions on the engine.
@yao500 see here is that what you looking for.
Motorkabelbaum A1405406932 (US version/ with EGR)
Electrical and electronic spare parts for your classic Mercedes Benz in the best possible quality.
Is that what you looking for?
Mercedes engine harness A1244402933
Mercedes engine harness for W124 280E 320E
Here this workshop requires a old harness to build a new one..Is that what you looking for?
Mercedes engine harness A1244402933
Mercedes engine harness for W124 280E 320Ekurth-classics-autoparts.de
Motorkabelbaum Restauration W124 M104 280 320 - DerKabeldoc.de
