Just wondering if it's possible to install a door lock switch to my car which did not have the switch from the factory, my 320ce had the switch. I was able to find a switch and think it would be much more convenient to unlock/lock the doors rather than pull up/push down the door pins. How would I go about doing the wiring? Thanks in advance for any input.
-
Hi Guest !
Welcome to the 500Eboard forum.
Since its founding in late 2008, 500Eboard has become the leading resource on the Internet for all things related to the Mercedes-Benz 500E and E500. In recent years, we have also expanded to include the 400E and E420 models, which are directly related to the 500E/E500.
We invite you to browse and take advantage of the information and resources here on the site. If you find helpful information, please register for full membership, and you'll find even more resources available. Feel free to ask questions, and make liberal use of the "Search" function to find answers.
We hope you will become an active contributor to the community!
Sincerely,
500Eboard Management
Door lock console switch installation
- Thread starter bryanjchen
- Start date
