SOLD Fan shroud, upper AND lower

[Hakie]

Parting out my project E420. Plan was to repair the car but it had to much rust so I had to decide to stop the project.

For sale is a complete, undamaged shroud. It took me a lot of time/effort to seperate the parts without damaging the copper nuts witch are “fixed” in the lower shroud.
The lower shroud is NLA so this is a change to get a clean, as good as new shroud.
Please don’t blame me for the high price, the project has cost me a LOT of time and money.
Bought the car 2 years ago and had it transported from France to Netherlands. Hopefully by the parts i can reduce my “loss” somewhat.

Asking $300 for the lower AND upper shroud. (Sold only as set).
Price includes shipping wherever it goes.

 

[gerryvz]

No question this is going to sell very fast !!

 

[744Brillantsilber]

Hey Hakie,

They look great, I am very interested in them.
Maybe we can work something out with a few other parts to keep the shipping prices from exploding!

 

[gsxr]

Someone will jump on this...the lower shroud is extremely difficult to locate intact.

FYI for the new owner, the correct bolts with captive washers are very inexpensive, p/n: 914001-005002

Apply anti-seize paste to the threads at final installation, this should prevent the bolts from seizing in the future.

 

[Hakie]

Sale pending. (Briljantsilber)

 

[Sam SL]

PM sent in case sale falls thru.

 

[jnes]

Bit OT but has anyone source good alternative for those rubber flaps? Or can you glue/weld them?

I have few flaps which need some repairing. One solution is to buy new upper shroud where the flaps are new but that is bit pricey..

 

[195910]

Bit OT but has anyone source good alternative for those rubber flaps? Or can you glue/weld them?

I have few flaps which need some repairing. One solution is to buy new upper shroud where the flaps are new but that is bit pricey..

Not sure they are available on any other non-036 car.

 

[195910]

Parting out my project E420. Plan was to repair the car but it had to much rust so I had to decide to stop the project.

For sale is a complete, undamaged shroud. It took me a lot of time/effort to seperate the parts without damaging the copper nuts witch are “fixed” in the lower shroud.
The lower shroud is NLA so this is a change to get a clean, as good as new shroud.
Please don’t blame me for the high price, the project has cost me a LOT of time and money.
Bought the car 2 years ago and had it transported from France to Netherlands. Hopefully by the parts i can reduce my “loss” somewhat.

Asking $300 for the lower AND upper shroud. (Sold only as set).
Price includes shipping wherever it goes.

Hi Hakie,

Why don't you post pictures of the car, maybe members would be interested in other parts. Just a suggestion.

 

[jnes]

Not sure they are available on any other non-036 car.

Sorry my mistake, I meant 036 upper shroud. It should be still available from the dealer.

 

[gsxr]

Sorry my mistake, I meant 036 upper shroud. It should be still available from the dealer.

Yes - the upper is available and comes with new rubber flappies. P/N A1245001255, $81 USD MSRP, ~$60 from discount dealers.

If someone only needs one or two rubber flaps, it's possible a forum member might have extras for sale from and old/broken shroud section.

 

[Hakie]

Hi Hakie,

Why don't you post pictures of the car, maybe members would be interested in other parts. Just a suggestion.

Sure I will 105910,
Not doing that yet because I need to do this is on my own pace. I think, when I post pictures that I will get lots of questions and to be honest, I do not have the time right now. There is a lot going on right now here.
But if any of you have questions please ask via PM.
Note that the whole interior is already sold. Cluster is sold, rear view mirror sold.

Anyway, keep an eye on the forum. I will post more parts for sale.

thanks!

 

[Hakie]

The parts are sold!

 

[incaico]

If anyone has the upper shroud, my 1992 400e needs one. I will buy upper and lower if I need to.

Thanks!

 

[northNH]

I have a complete upper shroud in very fine condition that I can let go…
Name that price…

 

[incaico]

I have a complete upper shroud in very fine condition that I can let go…
Name that price…

The last one available was sold at $300 for both upper and lower, which I found to be a fair price. I can do that

 

[northNH]

I hope I was clear, I only have the top shroud, tho’ it’s a real nice one…
You can do what? Name your price, AOK with me.

Sold my lovely 420; lots of spare parts and 400 parts car left over…
NIB E500 Hella Euro headlights as well.

 

[gerryvz]

I have a complete upper shroud in very fine condition that I can let go…
Name that price…

Please don’t piggyback on others’ FOR SALE threads. Please start your own thread if you are selling something, per forum policy.

 

[northNH]

Re: Upper fan shroud…
New Year’s Eve price update:
FREE + shipping.

Happy New Year

 

[incaico]

Re: Upper fan shroud…
New Year’s Eve price update:
FREE + shipping.

Happy New Year

Is the upper part still available? (1245001255)