FOR SALE fs - AMG staggered SL 2 piece wheels

[captruff]

I have a staggered set of used AMG SL 2 piece wheels, made in Germany by BBS, for sale

18x8.5 et25 front suggested tire size 245/40/18*

18x10 et25 rear suggested tire size 275/35/18

Here is a picture of my car with my SL 2 piece wheels**

* In the photos my car has a 12mm H&R spacer up front so the effective offset is 13
** My SL 2 piece wheels are not for sale

I will post up pictures of the actual wheels for sale over the weekend when I have a chance to take pictures , no tires, lug bolts, or center caps are included

The wheels are in useable condition "as is"; the previous owner was running them on his R129 SL, BUT I would consider these wheels as a core set for refurbishment.

$1,200.00 FOB my warehouse in Orange County, CA Local pick up is encouraged. I do accept Paypal and ship UPS daily from my office.

Thanks,

Jeff

 

[Cadence]

I will take them. PM sent.

 

[BahnStorm]

Is your 500E solid black? Doesn't look metallic...?

 

[captruff]

Is your 500E solid black? Doesn't look metallic...?

Correct my paint is non metallic (040)

Jeff

 

[Zuffenhausen]

interested please send pics 96champs@bellsouth.net

 

[captruff]

Hello:

Here are pictures of the actual SL 2 piece wheels I have for sale. I found four used center caps that I will include. I can see a small flat spot/ bend in one of the rear inner barrels. There are no visible cracks on the barrels. No welds to suggest any prior repair. The front lips have some obvious curbage and failing clear coat, BUT I can see the "machined" finish so they have not been painted or high polished. The centers of these wheels look to have been painted or powder coated at some point. There is chipping of paint near the center cap, facia, and lug holes. The AMG and logo on the centers are not super sharp as they have extra paint or powder coat material built up. One front wheel is missing a single Titanium bolt.

Part numbers

front# HWA 129 400 15 02

8.5x18 et25
8.5x18 et23*

* I double checked that the part #s for the 2 front wheels are identical, but the offset for one wheel is et23 and the other et25 I have only seen et25 in the past and I think early 8.5x18 wheels had a more aggressive offset of et23 vs et25 This 2mm difference can be corrected by using a 2mm spacer on the et25 wheel or you could have 2mm machined off the wheel pad of the et23 wheel which would make the effective offset 25.

rear# HWA 129 400 17 02

10x18 et25

missing Titanium bolt

slight inner barrel bend

Here is the photobucket link so you can see the detailed photos. I can certainly take more photos if needed.

http://s59.photobucket.com/albums/g293/ ... red%20set/

I already have a pending sale for these wheels based of my description, but I want the potential buyer to review the pictures before making his final decision. I realize these wheels are not perfect, they are used and circa 1994-1998. Again, given their present condition, I consider this set a core set suitable for refurbishment. Please note there are no cracks in the wheels, but a visible bend in one of the rear wheel and a missing Titanium bolt in a front wheel.

Thanks,

Jeff

 

[captruff]

These wheels have been sold!

Thanks,

Jeff