W124 E500 1995
Throttle wire was in terrible condition - inside throttle body it's insulation was absent at all !
It is strange that ASR light & limp mode was not all time.
Could anybody help with actuation -
menu EFP actuations -> Throttle valve clutch
When I push "Open" - throttle makes a noice
Clsd - silence
Is something wrong ?
"Move throttle valve" menu - voltage does not change when I press Open or Clsd
Throttle wire was in terrible condition - inside throttle body it's insulation was absent at all !
It is strange that ASR light & limp mode was not all time.
Could anybody help with actuation -
menu EFP actuations -> Throttle valve clutch
When I push "Open" - throttle makes a noice
Clsd - silence
Is something wrong ?
"Move throttle valve" menu - voltage does not change when I press Open or Clsd
