Replaces one of your vents
-
Hi Guest !
Welcome to the 500Eboard forum.
Since its founding in late 2008, 500Eboard has become the leading resource on the Internet for all things related to the Mercedes-Benz 500E and E500. In recent years, we have also expanded to include the 400E and E420 models, which are directly related to the 500E/E500.
We invite you to browse and take advantage of the information and resources here on the site. If you find helpful information, please register for full membership, and you'll find even more resources available. Feel free to ask questions, and make liberal use of the "Search" function to find answers.
We hope you will become an active contributor to the community!
Sincerely,
500Eboard Management -
DISCLAIMER
500Eboard, including its owner, administrators and moderators do not endorse, approve or support any claims provided by sellers as to vehicle condition, history, title status or mechanical operation.
Forum members/sellers are fully responsible for the accurate representation of all vehicles and/or parts they list and describe for sale on this forum. 500Eboard is not legally liable or responsible for sellers who misrepresent their vehicles per US Federal, State and local laws and regulations pertaining to proper and accurate vehicle sales.
Thank you
FOR SALE Very cool 3D printed cup holder for the W124
- Thread starter 2phast
- Start date
Hey, have you been snooping in my car???Most folks center vent pod is broken anyway
Lol...I can give you a cheap work around, takes around 20 minutes if you have a glove box, 30 if you have an airbag.Hey, have you been snooping in my car???
Nice concept but I wouldn't want one in any of my w124s. A little wacky and when the grill is closed I'm sure will look out of place.
The cup holder which resides within the centre console does look very interesting FOR SALE - New cup holder design for the W124 | Parts for Sale
Mercedes really did have terrible cup holder design for a long time including the 140 and 220 S classes which are also basically none existent.
The cup holder which resides within the centre console does look very interesting FOR SALE - New cup holder design for the W124 | Parts for Sale
Mercedes really did have terrible cup holder design for a long time including the 140 and 220 S classes which are also basically none existent.
Best I can tell, the Germans decided it was not wise to drink and drive, especially at the 250kph vMax of the 500E... therefore, cup holders were unnecessary and superfluous.
My S600 has a fridge and massaging seats from factory as examples and I cannot place one single regular size coffee cup anywhere in the car! It's kind of hilarious how bad it is really. I need to buy one of those pop out w220 cup holders.Best I can tell, the Germans decided it was not wise to drink and drive, especially at the 250kph vMax of the 500E... therefore, cup holders were unnecessary and superfluous.
W124s were very similar of course. No actual cup holder provision from MB. If I had my 500E sorted with one the in cubby box holders I'd be happy. The other 124s can do without!
Thanks but I have a replacement vent in my parts stash (almost too small to be considered a stash).
I just need to find the time to install it.
I admire the design creativity of the 3D holder, but after almost a decade of proven use, I believe the Ultimate Cupholder is still the best option for our cars
I have them too bought after recommendations here, and they are great. And they’re easy to remove if not needed.
Regarding these ones here I’m not sure I’d want to replace the centre vents, but otherwise it’s seems to be a neat solution!
Similar threads
