WANTED WTB: Tools

[Ron500E]

Looking for the following MB tools.
They MUST have the MB Star.
And yes I know the Hazet ones are the same but... it's the collector mentality in me that dictates the Star must be present.

Spark Plug Boot Puller - 103 589 00 37 00.
Differential Oil Plug Remover - 117 589 02 07 00.
T-Handle Hook for pulling exhaust rubber donut.
1/4" Socket Set with Ratchet.
3/8" Socket Set with Ratchet.

Thanks for any help in reducing the balance in my bank account.

Kind Regards,

Ron

 

[gerryvz]

Ron,

As shown in your numbers, the diff plug and oil service wrench are one and the same. It's the same tool that I have shown on this forum recently. Do you want two of them or something?

They are not expensive and it's probably a good idea just to order a new one from MB.

 

[Ron500E]

Ron,

As shown in your numbers, the diff plug and oil service wrench are one and the same. It's the same tool that I have shown on this forum recently. Do you want two of them or something?

They are not expensive and it's probably a good idea just to order a new one from MB.

Just one, it was an OOPS moment.

Posted edited to remove my stupidity.

R

 

[gerryvz]

It's a typical GVZ jelmerian move, which is why I thought it unusual ;-)




Sent from my iPhone using Tapatalk

 

[Ron500E]

It's a typical GVZ jelmerian move, which is why I thought it unusual ;-)

Well, there ARE people who think that we are one and the same.....

R

 

[Maui]

I did not know there were MB ratchets and sockets.

 

[Ron500E]

I did not know there were MB ratchets and sockets.

I might be wrong on that part. I do know that they (Hazet) are recommended by MB though. Whether they have the Star or not is TBD.

R

 

[gsxr]

There are select MB socket/drive sets, but the prices are usually high enough to give Powerball winners pause prior to purchase. Hazet and Stahlwille are the typical OEM's with the MB star & p/n etched in addition to the OEM logos/numbers. I don't know if MB ever had normal hex sockets/drivers though, I've only seen the specialty stuff...

...for example the inverted Torx (Exx) driver set... oddly, the photos below show 17 pieces, but the MB price list says "9 pieces"... hmmm.

 

[Glen]

I bought this used about 10 years ago on eBay. It came pre-bent [emoji54] but works fine.

 

[samiam44]

In the old days- you could get a full tool set from MB. I believe there was a section on the microfish slides specifically for tools. Wrenches, screw driver, socket and rachet sets. Ussually they were hazet or stahlwille.

I remember someone showing for the stahlwille torque wrenches MB was cheaper than buying it from US vendors.


M

 

[gsxr]

Lots of things here to lighten your wallet, Ron:

http://www.startekinfo.de/etools/content/tn.jsp?prefix=000

Click the part number to see a drawing & description.

 

[jhodg5ck]

I bought this used about 10 years ago on eBay. It came pre-bent [emoji54] but works fine.
View attachment 38114

View attachment 38115

View attachment 38116

View attachment 38117

The old ones were blued... I actually prefer it to the new style they sell know. Got both, but always pull the oldtimer out.

 

[Ron500E]

Lots of things here to lighten your wallet, Ron:

http://www.startekinfo.de/etools/content/tn.jsp?prefix=000

Click the part number to see a drawing & description.

Joanna thanks you from the bottom of her wallet.

R

 

[gerryvz]

Lots of things here to lighten your wallet, Ron:

I don't think that statements and links like that are going to endear you to Joanna, GSXR.....

 

[gsxr]

I don't think that statements and links like that are going to endear you to Joanna, GSXR.....

Eeeeek. Good point. I need to tread more carefully...

 

[Maui]

Joanna thanks you from the bottom of her wallet.

R

Just tell her you're only gonna buy what you need.