Door moisture barrier

[makemann]

I successfully replaced the left rear door window regulator last night thanks to the detailed tips provided on this site.

Can anyone please provide the part number for the plastic moisture barrier for the left rear door? The PO has removed it for a previous regulator repair and didn't replace it.

Happy Thanksgiving!

 

[nocfn]

I will look it up on the EPC for you, It was NLA for the W126, so a home depot/lowes trip and you can buy a 4x8 sheet in the roofing area. Similar to tyvek, but its not that brand, maybe a few mil thicker than stock. BRB....


A1247370087 looks like it available as well! Few bucks.

Lower cost alternative to Dynamat: http://www.lowes.com/pd_154017-81326-PS625___?productId=1018733&pl=1&Ntt=peel+and+seal#3d

 

[makemann]

Thank you! Great idea with the Tyvek solution.


Sent from my iPad using Tapatalk

 

[Allgonquin]

You can just use any plastic like from a heavy plastic drop cloth or similar. There really is no technology with this "barrier". I cut a piece of drop cloth and glued it with "Goop" glue, which reminds me a lot of what used to be called "Duco Cement" when I did my regulator a while back.

 

[nocfn]

Just noticed I posted a useful but non-related link. You get the idea though, a nice stiff piece of plastic but for 2 bucks, order 4 with next order of crush washers or filters.