• Hi Guest !

    Welcome to the 500Eboard forum.

    Since its founding in late 2008, 500Eboard has become the leading resource on the Internet for all things related to the Mercedes-Benz 500E and E500. In recent years, we have also expanded to include the 400E and E420 models, which are directly related to the 500E/E500.

    We invite you to browse and take advantage of the information and resources here on the site. If you find helpful information, please register for full membership, and you'll find even more resources available. Feel free to ask questions, and make liberal use of the "Search" function to find answers.

    We hope you will become an active contributor to the community!

    Sincerely,
    500Eboard Management

  • DISCLAIMER
    500Eboard, including its owner, administrators and moderators do not endorse, approve or support any claims provided by sellers as to vehicle condition, history, title status or mechanical operation.

    Forum members/sellers are fully responsible for the accurate representation of all vehicles and/or parts they list and describe for sale on this forum. 500Eboard is not legally liable or responsible for sellers who misrepresent their vehicles per US Federal, State and local laws and regulations pertaining to proper and accurate vehicle sales.

    Thank you

FOR SALE FS: .036 front bumper cover - used

Status
Not open for further replies.

Jimbo

E500E **Meister**
Member
SOLD: .036 front bumper cover - used

I have this cover painted 199....it has a few issues that can be fixed.

First: Paint....obviously there are scuffs and peeling paint. Obligatory to refinish this one.
Second: 2" rip.....left topside; it can be repaired via plastic weld I'm told, it is mostly covered by the chrome trim that sits above it tho.
Third: Busted grill intake tabs, a few are busted at the top and can also be repaired via plastic weld.

It comes with either a painted (gloss black) or unpainted bumper strip...both are in excellent shape. In fact, the black painted one is perfect (it was painted by the body shop in error; they should have left it unfinished for a 92')...also comes with the rubber gasket shown that goes behind the cover. No tow hook cover but they are still available new today.

$750 gets you all of it; either bump strip , the gasket and the cover. There is no shipping available for this, it is pick-up only in central Connecticut. I could deliver also with my truck within a hours drive if needed.
 

Attachments

  • IMG_1470.JPG
    IMG_1470.JPG
    1.4 MB · Views: 177
  • IMG_1471.JPG
    IMG_1471.JPG
    1.1 MB · Views: 175
  • IMG_1472.JPG
    IMG_1472.JPG
    974.8 KB · Views: 158
  • IMG_1473.JPG
    IMG_1473.JPG
    1.1 MB · Views: 164
  • IMG_1474.JPG
    IMG_1474.JPG
    1.5 MB · Views: 205
  • IMG_1475.JPG
    IMG_1475.JPG
    1.2 MB · Views: 167
  • IMG_1476.JPG
    IMG_1476.JPG
    985.2 KB · Views: 160
Last edited:
These are NLA, and nobody has snagged it yet? Might be the lack of shipping.

FYI, the front bumper can be boxed to just hit the maximum size allowed by UPS / FedEx Ground. It will be considered "Oversize 3" and cost a small fortune, but it can be shipped without resorting to Greydog or freight. I've shipped a couple of 'em in the past. Biggest nuisance is finding (or fabricating) a box in the precise size required.

:apl:
 
I just sold my truck too this past weekend! So it's pick-up only until I find another truck , in a few months.
 
Status
Not open for further replies.

Who has viewed this thread (Total: 1) View details

Back
Top