WANTED Steering Gear Seal Kit

[lzamora]

Hi guys, I'm looking for the Steering Gear Seal Kit for an E420 94. If I'm correct, it's the same for the 500s. The part number should be 124 460 7901.

If I'm not mistaken this is NLA from MB and Out of Stock from other websites FEBI branded.

Anyone here has one as a spare or know where can I get one???

Thanks in advance!!!!

 

[gsxr]

124-460-79-01 is a full seal kit. Just buy the items separately.

Unless you are doing a full box teardown, only 3-4 seals are needed.

FYI - HOW-TO: Reseal the power steering box output shaft at Pitman arm | "HOW-TO" Tutorial Articles

The power steering system is the source of many fluid leaks on the 500E/E500 (and its baby brother, the 400E/E420). Along with the three rubber hoses for the fluid lines to & from the pump, the gearbox itself can also leak. If there is visible wetness at the gearbox, first clean it off with carb...

www.500eboard.co

 

[gerryvz]

PLEASE do not repeat identical threads in multiple forums. One thread is just fine, and please use the correct forum when posting.

Multiple threads will be deleted immediately.

 

[lzamora]

I’m sorry for that. I just wanted to increase the chance of finding an item. Some people might only look at 420s while others might only see 500s.
That’s my humble point of view, but if breaks the forum rules or something, feel free to delete as you wish.

 

[gerryvz]

I’m sorry for that. I just wanted to increase the chance of finding an item. Some people might only look at 420s while others might only see 500s.
That’s my humble point of view, but if breaks the forum rules or something, feel free to delete as you wish.

It is abusive of our members to have the same identical thing repeated on the forum, and is against established forum rules and decorum.

If you're on Benzworld and want to post the same thing in multiple forums, fine. But we don't have Benzworld rules here.

If a 400E part that is wanted is relevant to 500E owners, then I would request in the 500E WANTED sub-forum.

If a 400E part request only has relevance to 400E owners, then it must be limited to the 400E WANTED sub-forum.

This is because the 500E is the larger focus for this forum.

 

[lzamora]

It is abusive of our members to have the same identical thing repeated on the forum, and is against established forum rules and decorum.

If you're on Benzworld and want to post the same thing in multiple forums, fine. But we don't have Benzworld rules here.

Ok

 

[gsxr]

In this case, the same part is used on both 034 and 036. It would get more visibility in the normal "Wanted" section, where this thread currently resides.

Anyway - as mentioned in post #2, you can buy the contents of the kit separately. Full part numbers are in the EPC, or the thread linked above has details the 3 common part #'s needed to re-seal a leak from the output shaft.

 

[lzamora]

In this case, the same part is used on both 034 and 036. It would get more visibility in the normal "Wanted" section, where this thread currently resides.

Anyway - as mentioned in post #2, you can buy the contents of the kit separately. Full part numbers are in the EPC, or the thread linked above has details the 3 common part #'s needed to re-seal a leak from the output shaft.

That’s a wonderful and lovely thread by the way. Thank you so very much for highlighting it. Will get the parts individually.