WANTED Urgently need an E-Gas Module

[TimL]

Hi, I'm looking to buy an E-Gas module (P/N 124-545-07-32 superseded by 124-545-45). My car is acting up and the culprit is either the throttle body assembly or the E-Gas Module. Since the former was replaced with a brand new unit 4 years ago, I want to start with replacing the latter to see if that cures the issue.

Since I'm planning a road trip to California on Wednesday, I'll need the module ASAP and will pay for expedited shipping.

Thanks!

Tim

 

[sheward]

I have a spare, that exact number, condition unknown. I'd like to hang on to it however I would be glad to ship it to you for your purposes/trip.

Feel free to call me. I'll send a pm.

 

[TimL]

Hi Drew, thank you for your very kind offer and the phone call - very much appreciated and very generous of you!!

Anyone who's willing to sell a unit, let me know and I'll be in touch

 

[gsxr]

Tim, it will be hard to locate one of the original numbers-matching units. I have a NOS #40 [edit: for sale, not for testing], technically for the .034 chassis but works perfectly in the .036 as well. But first, swap in Drew's module and see if anything changes!

 

[sheward]

Dave, If yours is known good It may be a better solution. Tim is going to check locally tomorrow and was then going to let me know if I should ship.

Tim, feel free to take Daves offer.

 

[TimL]

Tim, it will be hard to locate one of the original numbers-matching units. I have a NOS #40, technically for the .034 chassis but works perfectly in the .036 as well. But first, swap in Drew's module and see if anything changes!

Hi Dave, as Drew mentioned, Steve Geyer is checking if he has an E-Gas module in his parts stock and said he would let me know tomorrow if he does. If he doesn't have one, then I'll PM you about your unit and also let Drew know. Thanks again guys - really appreciate it!

 

[JC220]

It is a great idea where possible to have at least 1x full set of spare good tested modules and ETA with your m119 car. Indeed I have 2 or 3 soare sets all tested and put away for my m119 cars. Including where later modules are theft protected and coded to VIN I have them cloned and ready to fit.

Not always possible and not cheap nowadays but certainly worth working towards for anyone who plans to be a long term owner of m119 powered cars.