Evo 2 machine faced wheel images (Maxilite replicas)

[5thscaleracer]

ADMIN EDIT: Click here for additional details on these replica Evo wheels.

Here is what the machine faced wheel will look like.

There are some images showing dust particles that got cleared over and some minor scuffs from loading and unloading the wheel from the CNC mill on the inner barrel of the lip.

The dust particles is something can’t be controlled 100% because after cutting the face the wheel develops a slight charge.

There are two machine style options this is the finer cut which replicates the OE wheel.
There are two machine style options this is the finer cut which replicates the OE wheel.

I will be inspecting every wheel and before they are shipped if there are imperfections an image will be sent to you.

If there are huge imperfections the wheels will not be shipped out or offered for sale.

The image below to me are acceptable. So let me know what you guys think knowing and expecting some minor imperfections.

FYI set is available for purchase.

 

[szvook]

Dust particles and minor scuffs from loading and unloading the wheel from the CNC mill should be better controlled. But that’s just me. For the price of the wheels, it might be ok for some people.

FWIW, both of my HRE wheels were free of any scuffs or blemishes, but HRE has a very strict policy for maintaining their finished product.

 

[5thscaleracer]

Dust particles and minor scuffs from loading and unloading the wheel from the CNC mill should be better controlled. But that’s just me. For the price of the wheels, it might be ok for some people.

FWIW, both of my HRE wheels were free of any scuffs or blemishes, but HRE has a very strict policy for maintaining their finished product.

Yes this is the difference of outsource work using two vendors vs a big wheel production company where everything is done in house.

I am not a wheel manufacturer and these wheels were done using my local resource. This is why it’s a test set.

I agree with you completely about quality control.

If this was a product that I make in house then it’s a different question. To be honest selling wheels is not for me I prefer making exhaust kits, suspension kits, CNC parts etc.

I was simply attempting to offer a service for those who would want it nothing more.

On a side note if I’m charging $2000+ a wheel to do this then yes I can garantee the work to be top notch. That will pay for the equipment needed to get the job done in house.

 

[szvook]

I hear you. The fact that the wheels are available to begin with and at those prices is a huge win. So my hat’s off to you for even doing this. Maybe this set of wheels is an edge case, unless all sets have similar results.

 

[5thscaleracer]

I just received notification that the manufacturer of the wheel will be offering this finish as an alternative option

So looks like this was a wasted exercise on my part.

 

[5thscaleracer]

I hear you. The fact that the wheels are available to begin with and at those prices is a huge win. So my hat’s off to you for even doing this. Maybe this set of wheels is an edge case, unless all sets have similar results.

Only one wheel had the dust flurries and marks the rest came out 100%

 

[szvook]

Only one wheel had the dust flurries and marks the rest came out 100%

That’s good to hear. Sounds like a human error then.

 

[gsxr]

I just received notification that the manufacturer of the wheel will be offering this finish as an alternative option

So looks like this was a wasted exercise on my part.

OH NO!!! Sorry to hear that... very frustrating.

When you have details on the cost direct from the manufacturer, will you update the other thread?

 

[captruff]

I'm considering sending my 5 NOS factory painted EVOII wheels to JC to get the "machined facia" treatment.

jeff

 

[5thscaleracer]

OH NO!!! Sorry to hear that... very frustrating.

When you have details on the cost direct from the manufacturer, will you update the other thread?

It's looking to be $325.00 a wheel shipped. The wheels 8.25" will be available by next week they are already inbound.

 

[Russell R Coe]

It's looking to be $325.00 a wheel shipped. The wheels 8.25" will be available by next week they are already inbound.

I'm ready to purchase

 

[5thscaleracer]

OK if anyone would like to join this Group buy for the machine faced wheel let me know.

Time line:
1. Collect a list of interested buyers invoice will be sent out as i get notified payment is not due until June 1, 2021.
List will close on June 1 ,2021.

2. Pre-Paid orders will be placed on June 2, 2021

3. All orders will drop ship directly to you, if there are any wheel damages due to shipping or what ever please notify me ASAP so we can rectify the problem quickly. I will stock a few extra sets for this very reason.

4. Price is locked at $325.00 Shipped per wheel anywhere in the USA including Alaska, Hawaii but not P.R.

Send me an email or DM if you would like to participate.
5thscaleracer@verizon.net

Instagram messenger
@Flieben_CA

 

[Russell R Coe]

Email sent

 

[5thscaleracer]

Inventory has been secured and machine finish wheels will be available to ship by Monday 5-24-2021

40 wheels have been secured
Size 17X8.25" ET 34

17X7.5 is available upon request.

32 wheels are available for purchase

 

[kegmankipp]

What ET is the 7.5”?

 

[gsxr]

5thscaleracer, what forms of payment do you accept?

 

[5thscaleracer]

5thscaleracer, what forms of payment do you accept?

Everything is done by PayPal or Venmo which ever works for you.
PayPal offers buyer protection.
I will basically send you an invoice via PayPal email.

 

[5thscaleracer]

What ET is the 7.5”?

ET 37 so the wheels will sit roughly 15mm inside the fender flare.

 

[kegmankipp]

ET 37 so the wheels will sit roughly 15mm inside the fender flare.

Thanks, was curious for a 420 and that would sit nice on there.

Any chance you can get these guys to make 17” 3-piece monoblock replica?

 

[gsxr]

I'm guessing other widths / offsets are not available, but have you inquired if they would consider making some? For example, 17x8.5 ET25? I know it would be tough getting a group buy for non-standard sizes as everyone would want something different, but wasn't sure if the mfr in Europe would even consider it.

 

[5thscaleracer]

Thanks, was curious for a 420 and that would sit nice on there.

Any chance you can get these guys to make 17” 3-piece monoblock replica?

I actually have a cad file for that wheel but I’m scared to produce it.

 

[5thscaleracer]

I'm guessing other widths / offsets are not available, but have you inquired if they would consider making some? For example, 17x8.5 ET25? I know it would be tough getting a group buy for non-standard sizes as everyone would want something different, but wasn't sure if the mfr in Europe would even consider it.

The

I’m not in a position to make that happen.

minimum order would be 1000 wheels. We would need to start a go fund me account lol.

 

[kegmankipp]

I actually have a cad file for that wheel but I’m scared to produce it.

Don’t be scared. You could sell a ton of those wheels!

 

[5thscaleracer]

Wheels have arrived and shipped out last Friday.

everyone who has purchased last week should be receiving their wheels sometime this week.

tracking numbers have been emailed let me know if I missed anyone.

Thank you to those who participated

 

[5thscaleracer]

Those that purchase Machine finish wheels and received a silver set by mistake please let me know ASAP. It looks like the receiving warehouse did not pay attention to the order and may have shipped the wrong wheels.

To remedy the situation Call tags will be issued ASAP. I have 40 wheels machine finish inbound to CA expected delivery is Thursday 6-3-2021.

A replacement set will be sent out ASAP.

Sorry for the inconvenience

 

[Trae]

Been gone all month, but wife said there are four boxes in my garage!!!

Open as soon as I get home.

 

[Paladin350]

My set of 4 machine polished wheels arrived. They look fabulous!. Hats off to JC, an authentic stand-up guy. Waiting for my new Michelin shoes to show up on 7/1.

 

[Russell R Coe]

Paladin, what Michlin's did you go with?

 

[Paladin350]

Michelin Pilot Sport All Season 4 - 245/45/17. Michelin will begin shipping this new size on 7/1/21. Have your dealer pre-order them.

 

[Russell R Coe]

Thanks a ton

 

[Titan]

OK if anyone would like to join this Group buy for the machine faced wheel let me know.

Time line:
1. Collect a list of interested buyers invoice will be sent out as i get notified payment is not due until June 1, 2021.
List will close on June 1 ,2021.

2. Pre-Paid orders will be placed on June 2, 2021

3. All orders will drop ship directly to you, if there are any wheel damages due to shipping or what ever please notify me ASAP so we can rectify the problem quickly. I will stock a few extra sets for this very reason.

4. Price is locked at $325.00 Shipped per wheel anywhere in the USA including Alaska, Hawaii but not P.R.

Send me an email or DM if you would like to participate.
5thscaleracer@verizon.net

Instagram messenger
@Flieben_CA

I know I'm late to the party, but wondering if you have anymore or these wheels available? thanks

 

[5thscaleracer]

I know I'm late to the party, but wondering if you have anymore or these wheels available? thanks

sent you a PM

 

[Russell R Coe]

Up

For all of you that are wondering how the wheels will look, here is the result on my car.
Could not be happier with the result.
Thank you JC for putting this altogether, and dealing with grace on the small hic ups along the way.
I put Michelin Pilot Sport A/S 3+ sports on, and with the generous help from Capruff, got the correct Lug bolts and beautiful plain silver center caps.
Happy motoring all

 

[Titan]

Wow those look very nice!! Where did u order the lug bolts and center cap from? Do you need 39mm shank length with these wheels? Thanks

 

[gsxr]

Yes, you need 39-40mm shank length M12x.15 bolts for these wheels.

 

[Russell R Coe]

Wow those look very nice!! Where did u order the lug bolts and center cap from? Do you need 39mm shank length with these wheels? Thanks

I got them from Captruff who is the wheel man on this board.
Reach out to him he may still have some.

 

[5thscaleracer]

@Russell R Coe Car looks FANTASTIC!!! thanks for working with me on the hic ups and time delay.

 

[Titan]

great - thanks all!

 

[Trae]

Finally installed!

 

[gsxr]

Sweet! Where did you get the Pilots?

 

[Jlaa]

Au naturale feet ...

 

[5thscaleracer]

Finally installed!

Looks good & Fits good!

Thank you

 

[Paladin350]

Sweet! Where did you get the Pilots?

I ordered my set of Michelin Pilot Sport All Season 4 - 245/45/17 shoes from Gran Turismo East in Atlanta. This size became available from Michelin earlier this month.

 

[Trae]

Enjoying the new wheels.

 

[5thscaleracer]

Enjoying the new wheels.

View attachment 135678 View attachment 135679

perfect fit

 

[Trae]

Won 5th place in the Shelton Vineyards show in August. Everyone loved the wheels, even though I told them they were replicas.

 

[gsxr]

More pics of the Maxilites. They look sharp!

 

[captruff]

Here they are on my 190E 2.3-16

Normally I shy away from 17" on a 16V since the only 225/40/17 was the Hoosier A7/R7 with a treadwear of 40, until Continental came out with the Extreme Contact in 225/40/17 with a treadwear of 200

I was not comfortable with a 215/40/17 or 235/40/17

****IMPORTANT NOTE: THESE ARE THE REPLICAS OF THE EVOII AND ALTHOUGH THEY LOOKS THE SAME IN ALMOST EVERY WAY, IN MY APPLICATION TO MY 16V I WAS NOT ABLE TO USE THE FACTORY LUGS AS THEY WERE NOT LONG ENOUGH TO GET ME THE 6 TURNS IN SO I HAD TO FIND LONGER LUGS. THIS IS PROBABLY TRUE FOR THE 500E500 CARS. PLEASE DOUBLE CHECK YOUR APPLICATION.

Jeff

 

[captruff]

Hello:

For those running these replica EVOII wheels on the 500E500s

****IMPORTANT NOTE: THESE ARE THE REPLICAS OF THE EVOII AND ALTHOUGH THEY LOOK THE SAME IN ALMOST EVERY WAY, IN MY APPLICATION TO MY 16V I WAS NOT ABLE TO USE THE FACTORY LUGS AS THEY WERE NOT LONG ENOUGH TO GET ME THE 6 TURNS IN SO I HAD TO FIND LONGER LUGS. THIS IS PROBABLY TRUE FOR THE 500E500 CARS. PLEASE DOUBLE CHECK YOUR APPLICATION.

JEFF

 

[gsxr]

Jeff, from memory, the factory 40mm lug bolts don't normally get a full 6 turns with OE MB wheels either. I'll measure how far the lugs protrude from the back of factory wheels vs the Maxilite but I'm expecting them to be the same.

Stay tuned!