-
Hi Guest !
Welcome to the 500Eboard forum.
Since its founding in late 2008, 500Eboard has become the leading resource on the Internet for all things related to the Mercedes-Benz 500E and E500. In recent years, we have also expanded to include the 400E and E420 models, which are directly related to the 500E/E500.
We invite you to browse and take advantage of the information and resources here on the site. If you find helpful information, please register for full membership, and you'll find even more resources available. Feel free to ask questions, and make liberal use of the "Search" function to find answers.
We hope you will become an active contributor to the community!
Sincerely,
500Eboard Management -
DISCLAIMER
500Eboard, including its owner, administrators and moderators do not endorse, approve or support any claims provided by sellers as to vehicle condition, history, title status or mechanical operation.
Forum members/sellers are fully responsible for the accurate representation of all vehicles and/or parts they list and describe for sale on this forum. 500Eboard is not legally liable or responsible for sellers who misrepresent their vehicles per US Federal, State and local laws and regulations pertaining to proper and accurate vehicle sales.
Thank you
WANTED 93 500e parts needed for repair: Fender & door moulding, taillight
- Thread starter MK500
- Start date
The taillight should be a regular W124 pre-facelift taillight. Easy enough to find at a wrecking yard, from someone here on the forum, or via eBay.
To help folks, can you provide photographs of the parts that you are looking for? It will help spark peoples' memory if they have a spare or not -- most folks here don't think in part numbers / word descriptions.
My suggestions here are just trying to help you make a match and get your parts by allowing people to visualize what you need, rather than reading words and numbers, and then requiring them to look up the part number in a parts catalog (nobody is going to do this) to look at it on a line diagram.
To help folks, can you provide photographs of the parts that you are looking for? It will help spark peoples' memory if they have a spare or not -- most folks here don't think in part numbers / word descriptions.
My suggestions here are just trying to help you make a match and get your parts by allowing people to visualize what you need, rather than reading words and numbers, and then requiring them to look up the part number in a parts catalog (nobody is going to do this) to look at it on a line diagram.
I was looking at the damage on your car shown here;
500E - Had an accident in the Pearl black 1993 500e driver side . Looking for parts… | Wanted to Buy
Looking for Front Bumper, one (1) 18” monoblock wheel, left front fender, driver side door and passenger side door and left rear fender. Appreciate any help.
www.500eboard.co
You are looking for the LT quarter moulding -124 698 15 30, but did that one break as well?
No. fortunately.And thanks for pointing this out regardless.
I know you don't want to hear this... but the stainless trim & plastic moulding shown in your photos both appear fixable. It will be extremely difficult to find NOS or used, mint-condition pieces for sale. If it were my car, I'd reuse what you have. Trick will be finding a body shop willing to restore what you have, not just insist on new replacements.
Before and after the March drivers side 1993 500e sideswipe. My fault. Work done by Berli’s in Austin. Best in town. Highly recommend for top quality body and paint. Believe it or not State Farm was also a pleasure to work with. Had patience knowing we had to source parts from non typical sources and paid up. Glad to,have her back on the road! Appreciate everyone’s help from the board!
Attachments
Similar threads
