-
Hi Guest !
Welcome to the 500Eboard forum.
Since its founding in late 2008, 500Eboard has become the leading resource on the Internet for all things related to the Mercedes-Benz 500E and E500. In recent years, we have also expanded to include the 400E and E420 models, which are directly related to the 500E/E500.
We invite you to browse and take advantage of the information and resources here on the site. If you find helpful information, please register for full membership, and you'll find even more resources available. Feel free to ask questions, and make liberal use of the "Search" function to find answers.
We hope you will become an active contributor to the community!
Sincerely,
500Eboard Management
CV Joint Grease
- Thread starter Black 034
- Start date
OE is p/n 001-989-05-51 for 150g tube, about $20:
www.mbpartsource.com
OEM GKN/Lobro # 9004311 is a packet of 80g, $2/ea from RME:
Not sure what Amsoil or Redline products are equivalent. Shouldn't need this unless replacing or re-booting a CV joint.
001-989-05-51 - Special Grease MB Parts Source
Factory Direct Special Grease (19890551) For Your
www.mbpartsource.com
OEM GKN/Lobro # 9004311 is a packet of 80g, $2/ea from RME:
Not sure what Amsoil or Redline products are equivalent. Shouldn't need this unless replacing or re-booting a CV joint.
Replacing all the rear suspension arms, wheel bearings and CV Boots. All orginal at 265,000 miles the boots are hard and the lower wheel carrier bushings are shot. The inner CV bolts are being stubborn so I am going to try my heat gun 1100 F hope to break the loctite loose. I have a 1,000 ftlb battery impact and impact square sockets. Wish me luck.
