-
Hi Guest !
Welcome to the 500Eboard forum.
Since its founding in late 2008, 500Eboard has become the leading resource on the Internet for all things related to the Mercedes-Benz 500E and E500. In recent years, we have also expanded to include the 400E and E420 models, which are directly related to the 500E/E500.
We invite you to browse and take advantage of the information and resources here on the site. If you find helpful information, please register for full membership, and you'll find even more resources available. Feel free to ask questions, and make liberal use of the "Search" function to find answers.
We hope you will become an active contributor to the community!
Sincerely,
500Eboard Management
500E FOX Exhaust fitment
- Thread starter Greg1980
- Start date
Not sure about for that tip style, but the Fox turn-down tips DO NOT require trimming the bumper. And, I would not buy any muffler that does require cutting the bumper. Don't do that.
Detailed photos at the link below, post #425 and #431:
OWNER - JC220 | Owners and Their Cars
AHE is trailer hitch control. Seems that your car has one but it is not set in either the rear Sam or CGW, put that trailer recognition or AHE as present in one these units (not sure which one or both) then this CAN "error" will go. Not really an error more a wrong status... Next what you could...
Last edited:
It's 500e specific.
