FOR SALE Lorinser 500e 2 x REAR springs

[Amg_parts_jonathan]

Two used (no rust) Lorinser 500e springs.
200€ for the pair + shipping

Located in Germany

 

[gsxr]

Any chance you could measure the wire diameter with a caliper (should be around 16.1 mm or so for front springs), and the total free length?

 

[Amg_parts_jonathan]

Yes

 

[Amg_parts_jonathan]

Ø = 15mm
Length: about 28,8 cm

 

[gsxr]

Oh weird. That is very different than the AMG, H&R, and Brabus [front] springs.

Can you confirm the OD of the coil is 110mm and not 100mm?

EDIT: Google search indicates these are likely rear springs / 100mm outer diameter.

 

[Amg_parts_jonathan]

What is OD?

 

[500AMM]

Outer Diameter

 

[Amg_parts_jonathan]

yeah these are rear ones!

Still dont get it, sorry i am german. Lacking some English language skills in this department. Diameter of the spring is 15mm at the thickest points.

Idk where you get 100 and 110mm from

 

[gsxr]

Ah, they are rear springs - that makes sense! I was thinking they were front springs (my mistake).

Front springs are ~110mm OD. Here's a diagram of the 100mm outer diameter:

 

[Amg_parts_jonathan]

Got it. Sorry!

100mm

 

[ArauzMotoring]

I wonder if these would be a better choice vs the H&R rear springs I still haven’t installed.