• Hi Guest !

    Welcome to the 500Eboard forum.

    Since its founding in late 2008, 500Eboard has become the leading resource on the Internet for all things related to the Mercedes-Benz 500E and E500. In recent years, we have also expanded to include the 400E and E420 models, which are directly related to the 500E/E500.

    We invite you to browse and take advantage of the information and resources here on the site. If you find helpful information, please register for full membership, and you'll find even more resources available. Feel free to ask questions, and make liberal use of the "Search" function to find answers.

    We hope you will become an active contributor to the community!

    Sincerely,
    500Eboard Management

Trip computer retrofit

Niki

E500E Newbie
New Member
Hey everyone,

I am retrofitting a trip computer. Everything is so far in place but it is not working. No light on the display as well. There were burned traces on the back of the trip computer but I already restored them and now all traces seem to be fine.

Did anyone have a similar problem?

Thanks in advance :)
 

Attachments

  • 06BD4605-4FEC-4E09-9C07-AAA30F66F293.jpeg
    06BD4605-4FEC-4E09-9C07-AAA30F66F293.jpeg
    2 MB · Views: 9
USA never received the trip computer, I'm not sure what the problem might be... guessing either the gauge itself, or the controller module?

428kkm (265kmi)!!

1776361228612.png
:wahoo:
 
Thank you all anyway 😊.
What is " not" working? its kinda impossible to come up with any suggestions,or having any idea of what might be wrong with the system..with this little info :)First thing to check,is that the tripcomputermodule has power and grounds.Same for the instrument cluster parts, powers and grounds,,When this is verified...then you can start to dig into " what" is wrong..if powersngrounds is there :)
 

Who has watched this thread (Total: 1) View details

Back
Top