-
Hi Guest !
Welcome to the 500Eboard forum.
Since its founding in late 2008, 500Eboard has become the leading resource on the Internet for all things related to the Mercedes-Benz 500E and E500. In recent years, we have also expanded to include the 400E and E420 models, which are directly related to the 500E/E500.
We invite you to browse and take advantage of the information and resources here on the site. If you find helpful information, please register for full membership, and you'll find even more resources available. Feel free to ask questions, and make liberal use of the "Search" function to find answers.
We hope you will become an active contributor to the community!
Sincerely,
500Eboard Management
WANTED W124 E320 non ASR non ASD axle shaft.
- Thread starter disrupted
- Start date
Keep in mind you can only disassemble the diff side of the CVs.
I have new spare boot repair kits in my stash I no longer need if you haven't yet bought them, with extra grease packets, too. DM me if you're interested.
I have new spare boot repair kits in my stash I no longer need if you haven't yet bought them, with extra grease packets, too. DM me if you're interested.
Last edited:
I've been given a lead to one. I'm planning to cut open the outboard side to remove the shaft. I need a sample to send to Dutchman to manufacture shorter shafts to allow the use of the 210mm diff in the 190E.
The only other solution I've found online is the Kangaroo's Team custom shafts. Very spendy for a solution I'm not sure of.
The only other solution I've found online is the Kangaroo's Team custom shafts. Very spendy for a solution I'm not sure of.
