So I have a couple of new Depo headlight lens that I ordered for experimental purposes. I was hoping I could physically separate the clear polycarbonate lens from the gray PBT + GF 30% frame. It appears to me that the two plastic pieces have been Welded together. At first I thought maybe I could slowly heat the assembly in the oven to separate but I’m not sure this would work. Keep in mind the goal is to separate and still be able to reattach the two components. Me brain is smoking, oh. Do me have a material scientist in the house, someone with a recommendation, thanks.
-
Hi Guest !
Welcome to the 500Eboard forum.
Since its founding in late 2008, 500Eboard has become the leading resource on the Internet for all things related to the Mercedes-Benz 500E and E500. In recent years, we have also expanded to include the 400E and E420 models, which are directly related to the 500E/E500.
We invite you to browse and take advantage of the information and resources here on the site. If you find helpful information, please register for full membership, and you'll find even more resources available. Feel free to ask questions, and make liberal use of the "Search" function to find answers.
We hope you will become an active contributor to the community!
Sincerely,
500Eboard Management
Headlight lens separation? Advice’s needed
- Thread starter Blankets
- Start date
I have no idea if heat works, but, you could try a heat gun? It will localize the heat more should give you more control than heating the entire assembly up to 220+F ?
