Lug bolt recommendations for 2-pc AMG 18" wheels

[cdav]

I am looking for longer lug nuts for my wheels. My current setup is AMG BBS 2 piece with 10mm spacers all around. The first photo is what my setup currently looks like and the second photo is what I would like my setup to look like. Let me know if anyone has any recommendations for lug nuts that would look like that.

 

[gsxr]

Can you measure the depth of the bolt hole, from the outer edge of the ball seat surface to the face of the wheel?

I'm not certain if these "Styling I" wheels use the 85mm extended bolt heads like 1-piece "Styling II" Monoblocks, or not.

 

[cdav]

~34.3 mm

 

[gsxr]

OK, that should translate into needing the same 85mm total length, extended-head bolt used on many W210 chassis. Photo below. The type with the decorative cap are NLA so you would have to source 20 used ones and clean them up.

 

[captruff]

here they are

FOR SALE - 20 factory mid extended lug bolts for use with the AMG Monoblock II wheels | Parts for Sale

I have a set of 20 factory mid extended lug bolts for use with the AMG Monoblock II wheels These are the later style and do not have the beauty caps at the end that can and often fall off $140.00 delivered to the lower 48 Thanks, Jeff

www.500eboard.co

Jeff

 

[gsxr]

Note those are the newer style without decorative cap that can be polished... they won't look like the car in the first photo.

 

[Whitemamba23]

OK, that should translate into needing the same 85mm total length, extended-head bolt used on many W210 chassis.

Would these also be applicable when running the same wheels without 10mm spacers?