I am looking for the part numbers for the adjustment tools needed to set the position of the lift arms. For whatever reason the search function is not working today. From the picture of the needed tools I can make out the one part number but not the other. I guess my other question is are they still available to order? The lift arms on my sunroof are out of time and one side is significantly lower than the other. I imagine I could probably get it close if the tools are no longer available.
-
Hi Guest !
Welcome to the 500Eboard forum.
Since its founding in late 2008, 500Eboard has become the leading resource on the Internet for all things related to the Mercedes-Benz 500E and E500. In recent years, we have also expanded to include the 400E and E420 models, which are directly related to the 500E/E500.
We invite you to browse and take advantage of the information and resources here on the site. If you find helpful information, please register for full membership, and you'll find even more resources available. Feel free to ask questions, and make liberal use of the "Search" function to find answers.
We hope you will become an active contributor to the community!
Sincerely,
500Eboard Management
Sunroof adjustment tools
- Thread starter Alphasud40
- Start date
Thank you
Here you go! Now 10x the price. 
www.autohauspartsdelivered.com
www.autohauspartsdelivered.com
Genuine Gauge for 124-589-17-21-00 | Autohaus Parts Delivered
Find the right Gauge for your 124-589-17-21-00. Not sure what you need? Use our VIN number search tool to find everything you need in one spot.
www.autohauspartsdelivered.com
Genuine Gauge for 124-589-18-21-00 | Autohaus Parts Delivered
Find the right Gauge for your 124-589-18-21-00. Not sure what you need? Use our VIN number search tool to find everything you need in one spot.
www.autohauspartsdelivered.com
Thanks Dave. I ordered the tools at lunch. Got the last pair according to the parts guy at the dealer. Week and a half from Germany.
Need some help with synchronizing the sunroof motor after sunroof repairs. The only procedure I found was close the sunroof and pull out the white knob to disengage the cable from the motor. Then run the motor in the close position until the motor stops. I can’t get either to happen. When I pull the knob the sunroof continues to operate and there doesn’t seem to be a park position. Motor just keeps running.
Have you tried the "Adjustment" procedure shown at the link below, pages 3+4?
Thank you! That was what I was looking for and didn’t think to look at the cable replacement procedure. I was looking on Alldata and they showed making the alignment tool but there was no procedure that followed.
Similar threads
