Sunroof Shim?

[Ntrepid]

I just took my car in to have the sunroof reset (functions were limited only to tilt up and open).

The place I took it also did my headliner a while back (and did a fantastic job). The owner said that my driver's side rear corner was sitting a bit low and I needed some sunroof shims to bring it flush. As it is now, there is enough of a seal to keep water out.

Are these parts which can be sourced from Mercedes?


Robert

 

[gsxr]

The owner is mistaken. There are no shims. Here's the FSM procedure... but be careful! Before loosening anything, mark the existing position first so you can get it back to where it was in case things get hosed up:

http://www.w124-zone.com/downloads/MB CD/W124/w124CD2/Program/Chassis/77-110.pdf

 

[nocfn]

this is an incremental DIY job, but mark the starting points (good advice) boffin

 

[huseincar1]

Awesome!