YouTube: Factory training video on removal/install on front windshield glass

[Harv]

Found this on Youtube for anyone brave enough to try.

[video=youtube;PcJTtMBqoqY]https://www.youtube.com/watch?v=PcJTtMBqoqY[/video]
https://www.youtube.com/watch?v=PcJTtMBqoqY

 

[gsxr]

Awesome video showing how to do it properly - although I'd leave the hood bolted in place.

Anyone know of a similar video for the rear glass & trims, which are quite different than the front? Klink?

 

[nocfn]

Enjoyed that rivet tool...

 

[gsxr]

Enjoyed that rivet tool...

The one with the Star logo is probably a hunnert bucks.

 

[nocfn]

The one with the Star logo is probably a hunnert bucks.

I cannot get good angle with standard tool the few occasions I have had to install new window trim clips on 124/126.

 

[samiam44]

I can never do that- where do you find those cool safety glasses?

There is an excellent one on W211s I found on Youtube. About 30 minutes long.

 

[Rouven036]

Nowadays you use a rollout instead of the Fein Multitool. Less danger for scratches around the window frame. The bonnet removal was included till 20.11.1995. There it was published that a removal of the bonnet is no longer required.