Hi, 1994 E500 with ASR.
Pulled following codes using blink code reader, I included the short analysis from the pdf downloaded from diagnostic sub-forum:
Pin 6:
13 - Stop lamp switch (S9/1)
21 - ABS/ASR hydraulic unit, pressure switch (A7/3s1), charge
Pin 7
5 - Stop lamp switch (S9-1)
6 - Starter lock-out / backup lamp switch (S16-1)
Cleared moments ago.
Any ideas if they resurface?
Oddly enough, my ABS/ASR lights have lit (lighted?) and stayed on if traction lost briefly or tight turn initiated.
Thanks in advance.
Pulled following codes using blink code reader, I included the short analysis from the pdf downloaded from diagnostic sub-forum:
Pin 6:
13 - Stop lamp switch (S9/1)
21 - ABS/ASR hydraulic unit, pressure switch (A7/3s1), charge
Pin 7
5 - Stop lamp switch (S9-1)
6 - Starter lock-out / backup lamp switch (S16-1)
Cleared moments ago.
Any ideas if they resurface?
Oddly enough, my ABS/ASR lights have lit (lighted?) and stayed on if traction lost briefly or tight turn initiated.
Thanks in advance.
