-
Hi Guest !
Welcome to the 500Eboard forum.
Since its founding in late 2008, 500Eboard has become the leading resource on the Internet for all things related to the Mercedes-Benz 500E and E500. In recent years, we have also expanded to include the 400E and E420 models, which are directly related to the 500E/E500.
We invite you to browse and take advantage of the information and resources here on the site. If you find helpful information, please register for full membership, and you'll find even more resources available. Feel free to ask questions, and make liberal use of the "Search" function to find answers.
We hope you will become an active contributor to the community!
Sincerely,
500Eboard Management
SA torque specifications
- Thread starter szvook
- Start date
Steve, the mounting bolts are the same diameter as stock... use the 500E specs for everything.
I don’t have those specs, unless this is mentioned in the manual.
115Nm front calipers.
50Nm rear calipers.
The single rotor bolt just holds the rotor in place so it doesn't fall off... "snug" is all you need.
FSM links:
50Nm rear calipers.
The single rotor bolt just holds the rotor in place so it doesn't fall off... "snug" is all you need.
FSM links:
Similar threads
