wanted: Bracket for Non-CAT Mid pipes

[195910]

Its the Bracket that hold the mid pipes to the Transmission housing.

New or Used

PM with part number and price

Thanks

 

[gsxr]

I wouldn't mind one of these either. The bracket has been NLA for years unfortunately.

 

[195910]

I wouldn't mind one of these either. The bracket has been NLA for years unfortunately.

could it be fabricated? well we will need the design.

 

[gsxr]

could it be fabricated? well we will need the design.

I'm sure a copy could be made, but we would need an original to copy; or at least all the dimensions. I've never even seen a picture of one. You can modify a catalyst bracket to work by elongating the mounting holes but I'd prefer the correct item. Alternately, you can just leave the bracket off completely...

 

[195910]

I'm sure a copy could be made, but we would need an original to copy; or at least all the dimensions. I've never even seen a picture of one. You can modify a catalyst bracket to work by elongating the mounting holes but I'd prefer the correct item. Alternately, you can just leave the bracket off completely...

Problem is I think it serves a purpose. I think it reduces exhaust pipes movements especially during start/shutoff
did you modify the KAT bracket ? does it need new holes or such ?

 

[gsxr]

Yes, I did modify a KAT bracket to match the mounting points on the rear transmission housing.

 

[500AMM]

.

Item #89 first option, for non-cat cars: A 124 492 59 41

Image enclosed of item #89 second option, for cars w/cats: A 124 492 46 41
can be seen in here: http://www.500eboard.com/forums/showthread.php?t=6357&highlight=exhaust+bracket

 

[samiam44]

Anyone have a picture of a non-cat one?

M